Make it compatible with Inventor please!
 
 

 

3d – Complex Wireframe to solid for use in Autodesk – Stack Overflow

 

The only problem is that I cannot figure out how to import designs that were exported as mm. They import as inches and show up very large. You may have solved this already but just in case: When you are importing the model you can click on options and a window will appear. Here you can select the units, by default they should be set to “Template Units” and here you could change it to whatever unit you need.

I’ve installed the addin, and I’m attempting to do a mesh convert from the file as an. IPT, and after accepting the operation, it just seems to hang. I mean I cannot do a single thing after starting it. A few mouse clicks later, and the ‘busy wheel’ appears, and Inventor SP1 is no longer responding.

I am having the same problem for bigger. Smaller are converted fine. I have waited for hours but nothing happens. Is there a solution besides waiting? I tried to convert a. I have changed the star rating from an original 2 stars to 4 stars now. Rocky fixed the issue and it seems to work fine now. Thanks Rocky. I am fixing this issue and will publish the newer version. Thanks for your feedback. Thank you Rocky for looking into it. I am using SP1 so I look forward to the new version when it is available.

Seems to work fine now after Rocky fixed it up. Thanks Rocky! This next comment doesn’t really have anything to do with how the Mesh Enabler works other than how you import then use the Enabler: Make sure you know what your units are of the. I opened a customer model and it looked correct until I made a measurement and it was 12″ the real measurement was 0. The customer exported in mm and I imported in inch. So it sees the 12 as the value and the import doesn’t know or care what it is but as soon as I changed my import option to mm the.

Once the. Jeremy, I am having the same problem with it importing in inches when it should be in mm. How did you change the option to import in mm? Evan, What I did is when you go to open your.

That should do it. Keep in mind I believe it keeps as a default when you change that and you may have to go back and return it to whatever units you normally save in. Hope this helps. When it works, works good. Can run the same file twice in a row. One time converts meshes, next it won’t. Mesh Enabler.

Autodesk, Inc. Digitally signed app. App abbonamento. Sistema operativo:. Descrizione The Mesh Enabler application converts mesh features to solid base features or surface features.

Leggi documento Guida. Informazioni sulla versione Versione 1. Schermate e video. Recensioni dei clienti. L F aprile 06, Brandon Mooney dicembre 15, To the folks who see all the “doesn’t work! Michael Hahn agosto 24, Thank you so much for this update!! Ludovic Duvanel agosto 16, Please update the app, very usefull and no alternative found. Thank you a lot in advance ofr developpement. Elliott Potter agosto 12, Kirsten Jongman agosto 12, Brad Greentree luglio 29, Florian JUNG luglio 21, Hi When it is compatible with Inventor Alternative?

Jason Blane luglio 19, Jennifer Remy luglio 09, Daniel Leinz giugno 29, Please, Upgrade Scott Mikutsky giugno 24, Charles Louwagie giugno 28, Deividas Palacionis giugno 14, Please, Upgrade for INV to support. Marc Schneider maggio 28, Luciano Demarchi maggio 27, No funciona para Inventor , tuve que descar inventor Espero actualizacion. Navjot Cheema maggio 25, Doesn’t work with , please update it.

Alexandria Avery maggio 21, Levi Erickson maggio 14, Need to be updated. Doesnt work with inventor. Kai Jan Klimscha marzo 31, Not even the mentioned button appears. Wayne Newberry novembre 30, Download verificato Guida rapida. Compto dicembre 06, Same for me.

Alexander Messer dicembre 28, Kerry Hicks dicembre 30, Rocky Zhang Autore dicembre 31, Christopher Nguyen gennaio 04, Wayne Newberry gennaio 04, Adil Bu gennaio 09, Wayne Newberry maggio 14, Manju Odland novembre 14, Just Tried and it seems to work! Friedrich Kellner novembre 10, Stefan Chindea giugno 10, Ian Rose settembre 06, Make it compatible with Inventor please!

Rocky Zhang Autore aprile 20, Please update the app, very usefull and no alternative found. Thank you a lot in advance ofr developpement. Elliott Potter August 12, Kirsten Jongman August 12, Brad Greentree Juli 29, Hi When it is compatible with Inventor Alternative? Jason Blane Juli 19, Jennifer Remy Juli 09, Daniel Leinz Juni 29, Please, Upgrade Scott Mikutsky Juni 24, Charles Louwagie Juni 28, Deividas Palacionis Juni 14, Please, Upgrade for INV to support.

Marc Schneider Mai 28, Luciano Demarchi Mai 27, No funciona para Inventor , tuve que descar inventor Espero actualizacion. Navjot Cheema Mai 25, Doesn’t work with , please update it. Alexandria Avery Mai 21, Levi Erickson Mai 14, Need to be updated.

Doesnt work with inventor. Not even the mentioned button appears. Compto Dezember 06, Same for me. Alexander Messer Dezember 28, Kerry Hicks Dezember 30, Rocky Zhang Herausgeber Dezember 31, Christopher Nguyen Januar 04, Wayne Newberry Januar 04, Adil Bu Januar 09, Wayne Newberry Mai 14, Manju Odland November 14, Just Tried and it seems to work!

Friedrich Kellner November 10, Stefan Chindea Juni 10, Ian Rose September 06, Make it compatible with Inventor please! Rocky Zhang Herausgeber April 20, Published the 1. Thanks for your patience. Todd Mail April 26, Arik Bebes Februar 19, Rodolfo Ramos Castelo Branco April 05, Jordi Muller Mai 30, Jason Lawrence Juli 22, Aashrit Gautam August 05, Lorenzo Barabino November 12, Thank you, they should definetly write this somewhere. Eric bowling November 13, Why didn’t they put that in the install instructions?

I was so confused Thomas Hogan Dezember 15, Sa Sa Juli 03, Mihai Tudor Juni 04, Miloslav Hyk Februar 02, Tristan Andreas Oktober 01, Please fine tune! It is a great addition! Otacxjlf Otacxjlf September 28, Mom Jr August 24, Jeffrey Mather Juli 27, Anthony Brown Juli 11, Sergio Federico Mayer Mai 05, Hernan Gabriel Souto Oktober 13, Colin Maggard November 28, Christina Krywka September 03, Thank you so much, I thought it didn’t work on my machine!

Thank you! Thank you!!!!! Joona Prehti Oktober 13, You are the best 😀 funny this was not mentioned in the original instructions.. Jeanette Ramos April 23, Rocky Zhang Herausgeber April 27, The version number is corrected now, please check the latest version.

Orrin Bourne Oktober 13, Benjamin Weible Oktober 07, One star in the place of zero stars. Did not work for even a simple mesh conversion. Luis Gustavo Lang Gaiato September 25, Thank you. Andrew Scallon April 15, Jason Rozycki September 22, Dave Hoder Juli 25, Just tried this with Inventor and it worked great on an imported.

OBJ file Kohler sink. Rodolfo Ramos Castelo Branco Juli 20, Eric bowling novembre 13, Why didn’t they put that in the install instructions? I was so confused Sa Sa juillet 03, Mihai Tudor juin 04, Tristan Andreas octobre 01, Please fine tune! It is a great addition! Otacxjlf Otacxjlf septembre 28, Jeffrey Mather juillet 27, Anthony Brown juillet 11, Sergio Federico Mayer mai 05, Hernan Gabriel Souto octobre 13, Colin Maggard novembre 28, Christina Krywka septembre 03, Thank you so much, I thought it didn’t work on my machine!

Thank you! Thank you!!!!! Joona Prehti octobre 13, You are the best 😀 funny this was not mentioned in the original instructions.. Jeanette Ramos avril 23, Rocky Zhang Editeur avril 27, The version number is corrected now, please check the latest version. Orrin Bourne octobre 13, Benjamin Weible octobre 07, One star in the place of zero stars. Did not work for even a simple mesh conversion. Luis Gustavo Lang Gaiato septembre 25, Sydney Ackermans – Van Den Eynde avril 05, Thank you.

Andrew Scallon avril 15, Jason Rozycki septembre 22, Dave Hoder juillet 25, Just tried this with Inventor and it worked great on an imported. OBJ file Kohler sink. Rodolfo Ramos Castelo Branco juillet 20, Charlie Wright juin 20, Thomas Kalteis juin 06, Matheu Broom avril 17, Waiting to see it in the version. Great work! Thomas Stephan janvier 10, Santiago Aljure janvier 09, Bernard Li septembre 16, Miguel Angel Velasquez Zabala novembre 21, Good day Miguel any idea if mesh enabler can work with Autodesk im still old school lol.

Aleksandra Martynowicz octobre 09, Works great with Inventor Prof Pat Mcdonald septembre 08, Nuntaphob Mabjunthuk juin 23, Enrico Zandegiacomo mai 09, Andrea Marinelli mai 25, Enrique Centeno janvier 11, Can’t get it to work.

Restarted application, stl loads, but no conversion to solid. Luke Kani Zihni janvier 04, Colino Sprockel novembre 10, Chris septembre 06, Scott Moyse septembre 04, Oscar Mathews juillet 22, Emre Delikanli juillet 07, Frederic Defoy mai 14, Jack Caldwell mai 19, Tracy Chadwick juin 08, Thanks Jack Caldwell Robert Klewer mai 01, Sergey Minakov juin 09, Stanley Akers juin 24, Me as well what gives?

Ty Shipp juillet 07, Same problem here. Signed in and “Subscription App”. Jonathan Thompson octobre 14, Stan Feighny avril 10, Rocky Zhang Editeur avril 24, Which Mesh Enabler version you installed?

Maximilian Wolf mars 31, Wyatt Masniuk mars 20, Mark Ashbridge mars 31, I have same issue as you guys, no download link. I’d love to be able to use this feature. Heyuto Jona avril 01, Rocky Zhang Editeur avril 02, I can’t find it either.

I’m signed in, but this download isn’t an option. Adil Bu stycznia 09, Wayne Newberry maja 14, Manju Odland listopada 14, Just Tried and it seems to work! Friedrich Kellner listopada 10, Stefan Chindea czerwca 10, Make it compatible with Inventor please! Rocky Zhang Wydawca kwietnia 20, Published the 1. Thanks for your patience. Todd Mail kwietnia 26, Arik Bebes lutego 19, Alex Cope marca 14, Rodolfo Ramos Castelo Branco kwietnia 05, Jordi Muller maja 30, Jason Lawrence lipca 22, Aashrit Gautam sierpnia 05, Lorenzo Barabino listopada 12, Thank you, they should definetly write this somewhere.

Eric bowling listopada 13, Why didn’t they put that in the install instructions? I was so confused Thomas Hogan grudnia 15, Sa Sa lipca 03, Mihai Tudor czerwca 04, Miloslav Hyk lutego 02, Please fine tune!

It is a great addition! Mom Jr sierpnia 24, Jeffrey Mather lipca 27, Anthony Brown lipca 11, Sergio Federico Mayer maja 05, Colin Maggard listopada 28, Thank you so much, I thought it didn’t work on my machine! Thank you! Thank you!!!!! You are the best 😀 funny this was not mentioned in the original instructions.. Jeanette Ramos kwietnia 23, Rocky Zhang Wydawca kwietnia 27, The version number is corrected now, please check the latest version.

One star in the place of zero stars. Did not work for even a simple mesh conversion. Sydney Ackermans – Van Den Eynde kwietnia 05, Thank you. Andrew Scallon kwietnia 15, Dave Hoder lipca 25, Just tried this with Inventor and it worked great on an imported.

OBJ file Kohler sink. Rodolfo Ramos Castelo Branco lipca 20, Charlie Wright czerwca 20, Thomas Kalteis czerwca 06, Matheu Broom kwietnia 17, Yuval Dascalu lutego 23, Waiting to see it in the version. Great work! Thomas Stephan stycznia 10, Santiago Aljure stycznia 09, Christian Fallesen grudnia 15, Robert Goodson grudnia 08, Alexandre Machado grudnia 21, Miguel Angel Velasquez Zabala listopada 21, Phillip Andre sierpnia 06, Good day Miguel any idea if mesh enabler can work with Autodesk im still old school lol.

Miguel Angel Velasquez Zabala sierpnia 11, Works great with Inventor Prof Marcio Melo Rodrigues sierpnia 09, Andrew Scallon sierpnia 02, Nuntaphob Mabjunthuk czerwca 23, Enrico Zandegiacomo maja 09, Andrea Marinelli maja 25, Enrique Centeno stycznia 11, Jan Van De Geest grudnia 16, Can’t get it to work. Restarted application, stl loads, but no conversion to solid. Luke Kani Zihni stycznia 04, Colino Sprockel listopada 10, Tomek Brzezinski sierpnia 14, Oscar Mathews lipca 22, Emre Delikanli lipca 07, Frederic Defoy maja 14, Jack Caldwell maja 19, Tracy Chadwick czerwca 08, Thanks Jack Caldwell Robert Klewer maja 01, Sergey Minakov czerwca 09, Stanley Akers czerwca 24, Me as well what gives?

 
 

Autodesk inventor 2018 mesh enabler free

 
 

Please post a link here in the comments to your forum post so that I can join in and help with the answer! The Autodesk Labs team just love to keep on giving. This week sees the release of a new tool for converting mesh objects to solids. Autodesk Labs — Autodesk Inventor mesh enabler Autodesk Inventor onwards can already import many mesh formats. Lock and Load The download contains a zipped file with.

Now what? The mesh file is loaded into a new part. The final result! A solid feature, ready for you to start working with. You could also process this solid further by taking it into Inventor Fusion. Great stuff – just what I needed! Interesting – but limited in it’s use. Tantalizing but pointless The smoothening will help average out rugged sufaces from an stl Good luck!

Thank you so much for making this, i looked for answers on how to convert the file to an object for hours, but found no answer. Luckily, I stumbled uppon this saving grace and I am pleased to say that it works. Thank you for that complaint Thank god for your comment, i can’t believe Autodesk haven’t put this in the installation instructions.

First time I installed this, it didn’t work to make solid objects, it did automatically surfaces that I couldn’t edit. I reinstalled it and than it works. It is a little finicky, but by doing a solid extrude and then importing a mesh over and then making the mesh a solid, I was able to use the combine feature to make a cut requires two solids. If you aren’t getting the option when right clicking, make sure that you are right clicking on the mesh object under the mesh tree.

Also, as others have said make sure to enable the add-on. It isn’t automatic. This tool is especially helpful when i need to modify. Reading all the Reviews where users couldn’t figure out how to use Mesh Enabler – this isn’t a Help forum – go over here and ask for help. I installed this newer version of mesh Enabler for use with autodesk inventor but I had to revert to an older version.

It only converted my. But the moment i switched over to using mm in the ISO standard, the. This review should probably be under a bug reporting site but I cant find that so I hope the Autodesk team finds this here. Worked on Inventor after doind this:. Thanks Luis Gaiato! I thought it woudn’t work.

Very importont information. Tahnk you! Would be helpful if this information will be implemented in the description. Even though it is listed the 1. Please correct the file on the database, or correct listing if you don’t have the latest release yet.

I used this tool in and was able to multi-select mesh surfaces to convert it worked very well. But now in the ability to multi-select meshes is not available. I can only select 1 mesh at a time, process, then select again etc. I’d give 5 stars if I could multi-select again. You should post over in the Inventor forum and include the file.

It has worked for me for many years. Mark the automatic load box. Hello, when will the version for inventor be available? Mesh enabler 1. Same problem for me! Inventor with Windows 10 and newest MeshEnabler version. Hopefully there’s going to be a fix. Doesnt do what its say it does, spent hours, ends up making something that isnt a solid and you cant print it anyway.

Wast of time! I dont know why. When it converts the. I wonder, have anybody else experience this? Does anybody know how to correct this issue? I had the same problem and it took me a while to get it corrected. Good god this addin really is a must have for work with shape generation. Can’t believe it isn’t standard with inventor. Iv’e downloaded the application. Enabled add-ins on Inventor, but the option “Convert to Base Feature” never shows up.

You need to enable first. Sorry, but you should try it. I used this with Inventor , it took min to convert the part, however i am only running this on a laptop. Demorei para conseguir baixar, mais no final deu certo. Buongiorno, ho a disposizione inventor per studenti in italiano. Cosa posso fare? I use this tool to import. I can convert to solids and edit the designs. Just don’t forget to set the load behavior in the Add-in Manager, on “Load Automatically”. This article is very informative, but I’d you help me with a thing.

I imported a stl. Also, I cannot calculate the properties mass, volume Inventor doesn’t recognize it as a solid. I wish you could help me with this. If you tick ‘Load Automatically’ bottom right hand corner it should activate the add on every time you start inventor. I need the solid. Mesh Enabler was THE promise. Thx and best regards. I suddenly had a problem with this add-in and just had to re-inable it on the tool menu. It works great as long as you have it running. Install the add-in on a working student edition of inventor , but after installing add-in inventor crashes either during splash screen or after splash screen but before home page opens.

Inventor stalls out doesn’t shut down. Requires force-quitting After waiting long enough it does seem to get past the splash screen, but it still stalls for ages at the home screen open recently used files screen. It works well. I used it with 3DPrintTech 2. I haven’t download the program yet, but I wonder about that which version of inventor does it work with?

I will load inventor hsm pro v, any problem? The installation seems to work but once I am in Inventor Pro and the option “convert to base feature” is missing when right clicking on my object. So it seems to be loading but the menu entry is not there. How do I fix this?

Hey, i had the same issue. I fixed it by going to Tools and clicking on Add-Ins. I noticed that mesh enabler wasnt being loaded for my model, so i selected it and checked the boxes. Hope this works for you! Can somebody help?? I need the app really really urgently. I too am unable to see the the download despite being on Subscription. As luck would have in I need this urgently to create a Shrinkwrapped part of some Catia files which at the moment are only meshes.

Every time I’ve tried to use Mesh Enabler for a part that really isn’t that big, the program crashes. I keep seeing that the bug has been fixed but I’m still having this problem. I can’t seem to get the download link to appear. I am signed in and i click the subscription app button but nothing happens besides more dialogue. Would really like to use this app. To become a subscriber, please contact your reseller to help you.

I am in the same boat. I have logged in, gone to subscription page, and no download. Has anyone figured this out?

What a cool tool that addresses a need in my class Where is the link? Sorted by: Reset to default. Highest score default Trending recent votes count more Date modified newest first Date created oldest first. Improve this answer. Vlad Vlad 6 6 silver badges 14 14 bronze badges. Sign up or log in Sign up using Google. Sign up using Facebook. Sign up using Email and Password. Post as a guest Name. Email Required, but never shown. Not the answer you’re looking for?

Browse other questions tagged 3d modeling autodesk solidworks wireframe or ask your own question. The Overflow Blog. How to make time for learning in tech sponsored post.

Ready to optimize your JavaScript with Rust? Help us identify new roles for community members. Navigation and UI research starting soon. Temporary policy: ChatGPT is banned. Related 4. Hot Network Questions. Question feed. Accept all cookies Customize settings.